Maximum usage of solar power under different conditions
2015
Scientific Officer at DSTE, Tripura
Speciality aluminium MMC’s with unmodified and modified SiC for high performance application
2016
Associate Professor at IGDTUW, Delhi
Use of different graphene-derivatives to prepare high-performance polymeric composites
2017
Assistant Professor, Netaji Subhas University of Technology, Dwarka, New Delhi
Use of carbon based nanofillers for energy harvesting applications
2019
Effect of cryo-FSP on microstructural evolution and mechanical properties of stir cast Al7075-SiC pnanocomposites
2019
Assistant Professor, VIT Vellore, Chennai
Fabrication of organic/inorganic lead halide based perovskite solar cell under ambient conditions
2019
Assistant Professor at Amrita Vishwa Vidyapeetham, Bengaluru
Carbon nanofillers based thin films for toxic gas sensor applications
2019
Postdoctoral Research Associate, Ulsan National Institute of Science and Technology (UNIST), Republic of Korea
Fabrication of low-dimensional nanomaterials-based sensors for humidity and toxic gas detection.
2020
Postdoc researcher, University of Toronto, Canada
Advanced nanomaterials synthesis for hydrogen storage applications
2021
Postdoctoral Researcher, McMaster University, Canada
Polymer nanohybrids for proton exchange membrane in fuel cells
2021
Cellulose nanocrystals and graphene reinforced polymeric bionanocomposites
2021
Development of high capacitance material for binder free solid-state and suspension based electrochemical capacitors
2021
Scientist, Godi India Pvt. Ltd.
Hybrid polypropylene composites: effect of typical coatings on multi walled carbon nanotube
2021
Program Officer, IUSSTF, DST
Study of mechanical and thermal properties of polymer nanocomposites prepared using modified and unmodified nanonfillers
2022
ONGC, Tripura
Therapeutic use of CuO-biopolymer based nanoparticles for targeted drug delivery towards breast cancer
2023
MK-Bhan Young Research Fellow, RCB Faridabad, Haryana
Experimental and computational investigation on Mg-based composites for biodegradable internal fracture fixation
2023
Assistant Professor, IIT Patna
Tailoring MXene and Borophene Based Chemiresistive Sensors for Selective Gas Sensing
2024
Postdoc fellow, IIT Jammu
| Sr. No. | Name of Student | Year | Title of the Dissertation | Status |
| 1 | Mr. Gangaram Mandoloi | 2014 | Experimentation on MRR, surface finish and tool wear on HSS tool steel using different tool materials | Awarded |
| 2 | Mr. Ravi Kumar | 2014 | Investigation and simulation of fracture mechanism of aluminum alloy | Awarded |
| 3 | Mr. Pankaj Sharma | 2014 | Polymer nanocomposites for high performance application | Awarded |
| 4 | Mr. Rajneesh Raghav Tamta | 2014 | An investigation of tool wear, material removal rate and surface roughness by copper alloy tool on stainless steel in EDM process | Awarded |
| 5 | Mr. Vijay Kr. Pandey | 2015 | Prediction of fracture mechanism for polymer nanocomposites | Awarded |
| 6 | Mr. Ananya Chetri | 2015 | Speciality polymer matrix composite for automobile application | Awarded |
| 7 | Mr. Pratip Roy | 2015 | Influence of FSP on AA7075/SiC/CB metal matrix composites | Awarded |
| 8 | Mr. Sourav Baraik | 2016 | Modified Carbon Filler Reinforced Aluminium Composites | Awarded |
| 9 | Mr. Prateek Rajput | 2016 | Preparation of Al Composite by FSP for high performance application | Awarded |
| 10 | Mr. Suruj Protim Neog | 2016 | Influence of Nanofillers on Mechanical and Microstructural Analysis of Friction Stir Welded Dissimilar Aluminium Alloys | Awarded |
| 11 | Mr. Akhilesh Kumar Tiwari | 2017 | Thermal modelling and experimental validation of electric discharge machining process | Awarded |
| 12 | Mr. Pankaj Bisht | 2017 | Studies on different filler input by FSW on dissimilar metal joints | Awarded |
| 13 | Mr. Santosh Kumar | 2017 | Microstructure, mechanical properties and residual stresses as a function of input parameters in aluminum alloy by FSW | Awarded |
| 14 | Ms. Barkha Singh | 2017 | Quantum dots conjugated drug delivery system encapsulated in biodegradable polymer microspheres | Awarded |
| 15 | Mr. Arekh Sharma | 2017 | Metal matrix composites for aerospace applications | Awarded |
| 16 | Mr. Abhishek Gautam | 2018 | Polymer based nanocomposites for drug delivery | Awarded |
| 17 | Mr. Vikas Gangwar | 2018 | Studies on strength enhancement in porosity reduction in MMC’s by Friction Stir Welding process | Awarded |
| 18 | Mr. Sumit Kumar | 2018 | Effects of the materials on the design of mechanical housing for space craft electronics packages | Awarded |
| 19 | Mr. Dixit Khandelwal | 2019 | Perovskite solar Cell: Fabrication and Characterization | Awarded |
| 20 | Mr. Pranjal Gupta | 2019 | Fatigue crack growth behavior of friction stir welded 7075-T651 and 6082-T6 aluminium alloys | Awarded |
| 21 | Mr. Prashant Mani Sharma | 2019 | Effect of preheat and post heat treatment on the properties and the microstructure of aluminium-6082 by friction stir welding | Awarded |
| 22 | Mr. Vikas Singh | 2019 | Porosity and mechanical properties evaluation of friction stir welded dissimilar metal components | Awarded |
| 23 | Mr. Shrimanta Sundar Ramchiary | 2020 | Curcumin loaded fluorescent carbon dots conjugated drug delivery system encapsulated in biodegradable PLA microspheres | Awarded |
| 24 | Mr. Aman Kumar | 2021 | Magnesium based alloys for orthopedic application | Awarded |
| 25 | Mr. Chandrapal Singh | 2022 | Synthesis and characterization of curcumin loaded PMMA-PVA/ZnO nanocomposite for breast cancer therapy | Awarded |
| 26 | Mr. Sarvajeet Singh Nautiyal | 2022 | Statistical Modelling of an Industrial Boilers | Awarded |
| 27 | Mr. Debashish Debbarma | 2023 | Metal matrix composites for orthopaedic applications | Awarded |
| 28 | Mr. Sachin Kumar | 2023 | Materials for low-cost hydrogen generation | Awarded |
| Sr. No. | Name of Student | Year | Title of the Dissertation | Status |
| 1 | Mr. Alluri Vikas Varma | 2014 | Simulation of fatigue crack initiation for solid samples | Awarded |
| 2 | Mr. Banoth Veeranna | 2014 | Simulation of fatigue crack initiation for solid samples | Awarded |
| 3 | Mr. Arjun Kholia | 2015 | Tensile testing & characterization of plain and friction stir processed Aluminum 6061-T6 | Awarded |
| 4 | Mr. Rajat Goyal | 2015 | Tensile testing & characterization of plain and friction stir processed Aluminum 6061-T6 | Awarded |
| 5 | Mr. Bharat Garg | 2015 | Tensile testing & characterization of plain and friction stir processed Aluminum 6061-T6 | Awarded |
| 6 | Mr. Hitesh Garg | 2015 | Inventory Management in warehousing | Awarded |
| 7 | Mr. Rishabh Panwar | 2015 | Inventory Management in warehousing | Awarded |
| 8 | Mr. Saurav Parle | 2017 | Investigation of Electric Discharge Machining of Stainless Steel | Awarded |
| 9 | Mr. Sandeep Singh | 2017 | Investigation of Electric Discharge Machining of Stainless Steel | Awarded |
| 10 | Mr. Ambalal Bairwa | 2017 | Investigation of Electric Discharge Machining of Stainless Steel | Awarded |
| 11 | Mr. Ankit Kumar | 2017 | Strength Improvement and Prediction of Crack in Plastic Product | Awarded |
| 12 | Mr. Harmanpreet Singh | 2017 | Strength Improvement and Prediction of Crack in Plastic Product | Awarded |
| 13 | Mr. Sunandan Sharma | 2017 | Strength Improvement and Prediction of Crack in Plastic Product | Awarded |
| 14 | Mr. Arun Yadav | 2017 | Using Different Input Parameters for Friction Stir Welding of Aluminium Alloy | Awarded |
| 15 | Mr. Hemant Yadav | 2017 | Using Different Input Parameters for Friction Stir Welding of Aluminium Alloy | Awarded |
| 16 | Mr. Bhupender Kumar Lawa | 2017 | Using Different Input Parameters for Friction Stir Welding of Aluminium Alloy | Awarded |
| 17 | Mr. Amit Gond | 2018 | Metal Matrix Composites for Orthopaedic Application | Awarded |
| 18 | Mr. Amit Kumar Baghel | 2018 | Metal Matrix Composites for Orthopaedic Application | Awarded |
| 19 | Mr. Ankiv Kumar Maurya | 2018 | ParameterOptimization and Simulation for Electrochemical Flow Capacitor | Awarded |
| 20 | Mr. Aaditya Pandya | 2018 | ParameterOptimization and Simulation for Electrochemical Flow Capacitor | Awarded |
| 21 | Mr. Shubham Kumar | 2018 | ParameterOptimization and Simulation for Electrochemical Flow Capacitor | Awarded |
| 22 | Mr. Rakesh Kumar | 2018 | Synthesis and Application of Transition Metal Carbides via Ball Milling | Awarded |
| 23 | Mr. Shubham Jindal | 2018 | Synthesis and Application of Transition Metal Carbides via Ball Milling | Awarded |
| 24 | Mr. Vivek Kumar | 2018 | Synthesis and Application of Transition Metal Carbides via Ball Milling | Awarded |
| 25 | Mr. Amit Mosalpuriya | 2019 | Fabrication of Portable Gas Sensor Device | Awarded |
| 26 | Mr. Deepak Jangid | 2019 | Fabrication of Portable Gas Sensor Device | Awarded |
| 27 | Mr. Aditya Kumar Sinha | 2019 | Device Fabrication of Water Splitting Unit | Awarded |
| 28 | Mr. Dileep Kumar Vimal | 2019 | Device Fabrication of Water Splitting Unit | Awarded |
| 29 | Mr. Subham Kumar | 2019 | Device Fabrication of Water Splitting Unit | Awarded |
| 30 | Mr. Mayank Jadaun | 2019 | Fabrication and Simulation of Proton-Exchange Membrane | Awarded |
| 31 | Mr. Ankur Gupta | 2020 | Biomechanical Study of Metallic Biomaterials for Orthopaedic Application | Awarded |
| 32 | Mr. B. Sri Vardhan Reddy | 2020 | Biomechanical Study of Metallic Biomaterials for Orthopaedic Application | Awarded |
| 33 | Mr. Durgesh Singh | 2020 | Biomechanical Study of Metallic Biomaterials for Orthopaedic Application | Awarded |
| 34 | Mr. Dheerendra Pratap Meena | 2020 | Machining of Hard to Cut Material | Awarded |
| 35 | Mr. Gopal Ram | 2020 | Machining of Hard to Cut Material | Awarded |
| 36 | Mr. Jogesh Kumar | 2020 | Machining of Hard to Cut Material | Awarded |
| 37 | Mr. Pratik | 2021 | Finite Element Modelling and Simulation of Bone Remodeling in the Presence of Functionally Graded Orthopedic Implants | Awarded |
| 38 | Mr. Deepak Kumar | 2021 | Finite Element Modelling and Simulation of Bone Remodeling in the Presence of Functionally Graded Orthopedic Implants | Awarded |
| 39 | Mr. Aman Agarwal | 2022 | Devising Mg Based Orthopaedic Alloys using Predictive Modelling and design techniques | Awarded |
| 40 | Mr. Manas Chaudhary | 2022 | Devising Mg Based Orthopaedic Alloys using Predictive Modelling and design techniques | Awarded |
| 41 | Mr. Yashwant Yadav | 2022 | Devising Mg Based Orthopaedic Alloys using Predictive Modelling and design techniques | Awarded |
| 42 | Mr. Saurbhendra Dutt Shah | 2022 | Devising Mg Based Orthopaedic Alloys using Predictive Modelling and design techniques | Awarded |