Publication

Best Publications

  1. Nikhil Anand, Neha Mehrotra, and Kaushik Pal, “Enhanced strength, cytocompatibility, and corrosion resistance of biodegradable Zn-1.5Mg-0.5HA-xMn (x=1 and 1.5 wt%) composites for bone implant applications”, Journal of Alloys and Compounds – Volume 1003, 2024, 175571 10.1016/j.jallcom.2024.175571.

  2. Rahul Sharma, Neha Mehrotra, Inderdeep Singh, and Kaushik Pal, “Bioceramic Filled PLA Based Nanocomposites for Biomedical Application: An Experimental Investigation”, Ceramics International, Volume 50, Issue 16, 2024, Pages 28662-28681 – DOI:10.1016/j.ceramint.2024.05.17.

     

  3. Swati Singh, Kaushik Pal, “Folate Functionalized Multifunctional CuO@PHBV@PDA Nanoplatform for pH-Responsive Dual Drug Delivery and ROS-Driven Apoptosis in Breast Cancer”, Journal of Drug Delivery Science and Technology, volume 96, 2024, 105669 –DOI:10.1016/j.jddst.2024.105669.

  4. Neha Mehrotra, and Kaushik Pal, “Tumor targeted nanohybrid for dual stimuli responsive and NIR amplified photothermal/photo-induced thermodynamic/chemodynamic combination therapy”, Biomedical Materials, 19, 3, 035019, 2024 – DOI: 10.1088/1748-605X/ad330f.

  5. Debasish Debbarma, Nikhil Anand, and Kaushik Pal, “Exploration of microstructural characteristics, mechanical properties, and in vitro biocompatibility of biodegradable porous magnesium scaffolds for orthopaedic implants”, Biomedical Materials, Vol. 19, No. 2, 025050, 2024 – DOI: 10.1088/1748-605X/ad2c16.

  6. Naveen Kumar Arkoti, Kaushik Pal, “Selective Detection of NH3 Gas by Ti3C2Tx Sensor with PVDF-ZIF-67 Overlayer at Room Temperature”, ACS Sensors, 9, 3, 1465–1474, 2024, – DOI: 10.1021/acssensors.3c02551.

  7. Swati Singh, Ruchira Banerjee, Kaushik Pal, “Emerging Trends in Biodegradable Polymer-Metal Nanoconjugates for Cancer Therapeutics”, European Polymer Journal, Volume 207, 6 2024, 112835 DOI: 10.1016/j.eurpolymj.2024.112835.

  8. Swati Singh, Kaushik Pal, “Polyphenol Modified CuO nanorods Capped by Kappa-carrageenan for Controlled Paclitaxel Release in Furnishing Targeted Chemotherapy in Breast Carcinoma Cells”, International Journal of Biological Macromolecules, Volume 255, 2024, 127893 – DOI: 10.1016/j.ijbiomac.2023.127893.

  9. Vivek Verma, Swati Singh, Kaushik Pal, “A Comprehensive Study on the Age-strengthened Mg-Zn-Mn-Ca/ZnO Composites for Fracture Fixation: Microstructure, Mechanical, and In-Vitro Biocompatibility Evaluation”, ACS Applied Bio Materials, 2024, 7, 1, 203–219 – DOI: 10.1021/acsabm.3c00813.

  10. Swati Singh, Kaushik Pal, “Polyphenol Modified CuO nanorods Capped by Kappa-carrageenan for Controlled Paclitaxel Release in Furnishing Targeted Chemotherapy in Breast Carcinoma Cells”, International Journal of Biological Macromolecules, Volume 255, January 2024, 127893 – DOI: 10.1016/j.ijbiomac.2023.127893.

  1. Naveen Kumar Arkoti, Kaushik Pal, “Improved Selectivity of Borophene Sensor Towards NO2 Gas with PEI-ZIF-8 Overlayer”, Sensors and Actuators B: Chemical, Volume 401, 2024, 135033 – DOI- 10.1016/j.snb.2023.135033.

  2. Naveen Kumar Arkoti, Kaushik Pal, “PEI-ZIF-8 Overlayer Filter to Enhance the Selectivity of Amine Functionalized Nb2CTx Sensor Towards NO2 Gas at Room Temperature” 2023 IEEE 13th International Conference Nanomaterials: Applications & Properties (NAP), Bratislava, Slovakia, 2023, pp. NN03-1-NN03-5 – DOI: 10.1109/NAP59739.2023.10310700.

  3. Rakesh Kumar, Neha Mehrotra, Kaushik Pal, “Effect of friction stir processing on mechanical, in vitro degradation, and biocompatibility behaviour of stir casted Mg-Zn-rare earth oxide composites for biodegradable implant applications”, Journal Alloys and Compounds, Volume 146, 2023, 106073 – 10.1016/j.jallcom.2023.172767.

  4. Swati Singh, Kaushik Pal, “Actively Targeted Gold-Polydopamine (PDA@Au) Nanocomplex for Sequential Drug Release and Combined Synergistic Chemo-Photothermal Therapeutic Effects”, International Journal of Pharmaceutics, Volume 645, 2023, 123374 – DOI: 10.1016/j.ijpharm.2023.123374.

  5. Nikhil Anand, Neha Mehrotra, Kaushik Pal, “Biodegradable Implant Application: Electrodeposition of HA/TiO2/ZrO2 Coating onto Zn-Composite Substrates”, Journal of the Mechanical Behavior of Biomedical Materials, Volume 146, 2023, 106073 – 10.1016/j.jmbbm.2023.106073.

  6. Vivek Verma, Swati Singh, Kaushik Pal, “Exploring the potential of Mg-Zn-Mn-Ca/ZnO composites as a biodegradable alternative for fracture fixation: microstructural, mechanical, and in-vitro biocompatibility analysis”, Composite Structures, Volume 323, 2023, 117431 – DOI: 10.1016/j.compstruct.2023.117431.

  7. Swati Singh, Kaushik Pal, “Exploration of Polydopamine Capped Bimetallic Oxide (CuO-NiO) Nanoparticles Inspired by Mussels for Enhanced and Targeted Paclitaxel Delivery for Synergistic Breast Cancer Therapy”, Applied Surface Science, Volume 626, 2023, 157266 – DOI: 10.1016/j.apsusc.2023.157266.

  8. Vivek Verma, Swati Singh, Kaushik Pal, “Microstructural understanding of hydroxyapatite addition on age hardening, internal friction, mechanical and electrochemical response of resorbable magnesium alloys with good cytocompatibility”, ACS Biomaterials Science & Engineering, – DOI: 10.1021/acsbiomaterials.2c01403.

  9. Swati Singh, Kaushik Pal, “Folic acid adorned alginate-polydopamine modified paclitaxel/Zn-CuO nanocomplex for pH triggered drug release and synergistic antitumor efficacy”, International Journal of Biological Macromolecules, Volume 234, 2023, 123602 – DOI: 10.1016/j.ijbiomac.2023.123602.

  10. Kaushik Pal, Priya Mahato, Swati Singh, Partha Roy, “NIR-responsive 5-Fluorouracil delivery using Polydopamine coated polygonal CuS nanoplates for synergistic chemo-photothermal therapy on Breast Cancer”, Journal of Drug Delivery Science and Technology, Volume 80, 2023, 104092 – DOI: 10.1016/j.jddst.2022.104092.

  11. Sanjay Manda, Saurabh Kumar, Kaushik Pal, Arup R. Bhattacharyya, Ajay Singh Panwar, Indradev Samajdar, “Snoek-Dominated Internal Friction Response in bcc Steel: Relating Experiments with a Multi-Scale Atomistic Computational Framework”, Metallurgical and Materials Transactions A, 54, 562–576, 2023 – DOI: 10.1007/s11661-022-06899-5.

  12. Suruj Neog, Subhash Singh, Navneet Arora, Kaushik Pal, “Influence of nanofillers on mechanical and microstructural analysis of friction stir welded dissimilar aluminium alloys”, Journal of Materials Research and Technology – Communicated.

  1. Abhishek Gautam, Kaushik Pal, “Gefitinib conjugated PEG passivated Graphene Quantum dots incorporated PLA Microspheres for targeted anticancer drug delivery”, Heliyon, Volume 8, Issue 12, e12512 – DOI: 10.1016/j.heliyon.2022.e12512.

  2. N. K. Arkoti and K. Pal, “Work Function Modification of Borophene by Barium Decoration Towards Room Temperature NO2 Gas Sensor,” IEEE Sensors, 2022, pp. 1-4, DOI: 10.1109/SENSORS52175.2022.9967146.

  3. Nikhil Anand, Kaushik Pal, “Evaluation of biodegradable Zn-1Mg-1Mn and Zn-1Mg-1Mn-1HA composites with a polymer-ceramics coating of PLA/HA/TiO2 for orthopaedic applications”, Journal of the Mechanical Behavior of Biomedical Materials, Volume 136, 2022, 105470 – DOI: 0.1016/j.jmbbm.2022.105470.

  4. Vivek Verma, Kaushik Pal, “Experimental and numerical investigation on ZnP coated Mg-Mn based composite materials for internal fixation of tibia midshaft fracture: A comprehensive study”, Surface and Coatings Technology, Volume 447, 2022, 128785 – DOI: 10.1016/j.surfcoat.2022.128785.

  5. Saikat Suman, Kaushik Pal, Santanu Chattopadhyay, Anil K. Bhowmick, “3-Octanoylthio-1-propyltriethoxysilane functionalized silica/rubber composites for application in tire: Structure, performance and synergism”, Polymer Composites, Volume 43, Issue 10, 2022, Pages 7575-7599– DOI: 10.1002/pc.26863.

  6. Arekh Sharma, Subhash Singh, Kaushik Pal, “Investigation of microstructural and mechanical properties of Al alloy 7075-T6/B4C nanocomposite concocted via Friction stir process”, Ceramics International, Volume 48, Issue 23, Part B, 2022, Pages 35708-35718 – DOI: 10.1016/j.ceramint.2022.06.212.

  7. Barkha Singh, Swati Singh, Abhishek Gautam, Andrew J. Sutherland, Kaushik Pal, “Preparation and characterization of PLA microspheres as drug delivery system for controlled release of Cetirizine with carbon dots as drug carrier”, Polymer Bulletin, 2022 – DOI: 10.1007/s00289-022-04331-x.

  8. Keerti Rathi, A. Naveen Kumar, Kaushik Pal, “Fabrication of delaminated two-dimensional (2D) metal carbide MXenes (Nb2CTx) by CTAB based NO2 gas sensor with enhanced stability”, Advanced Materials Interfaces, Volume 7, Issue 12, 2022 – DOI: 10.1002/admi.202200415.

  9. Joy Saha, Kaushik Pal, “Investigation on Mechanical, Biocorrosion and Biocompatibility Behaviour of HAp Assisted Sr Based Mg Composites”, ACS Applied Bio Materials, 2022, 5, 6, 2608–2621 – DOI: 10.1021/acsabm.2c00093.

  10. A. Naveen Kumar, Kaushik Pal, “Amine functionalized stable Nb2CTx MXene towards room temperature ultrasensitive NO2 gas sensor”, Materials Advances, 3, 2022, 5151-5162 – DOI: 10.1039/d2ma00301e.

  11. Swati Singh, Chandrachur Ghosh, Partha Roy, Kaushik Pal, “Biosynthesis of folic acid appended PHBV modified copper oxide nanorods for pH sensitive drug release in targeted breast cancer therapy”, International Journal of Pharmaceutics, Volume 622, 2022, 121831 – DOI: 10.1016/j.ijpharm.2022.121831.

  12. Vivek Verma, Joy Saha, Kaushik Pal, “Investigation on Microstructure, Mechanical, Biocorrosion and Biocompatibility Behavior of Nano-sized TiO2@Al2O3 Reinforced Mg-HAp Composites”, Journal of Alloys and Compounds, Volume 910, 2022, 164866 – DOI: 10.1016/j.jallcom.2022.164866.

  13. Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Sahar Pishgar, Mahendra K Sunkara, Thad Druffel, Kaushik Pal, “Solution processed Cu:SnO2 as an efficient electron transport layer for fabrication of low temperature planar perovskite solar cell under ambient conditions”, IEEE Journal of Photovoltaics, Volume: 12, Issue: 5, 2022 – DOI: 10.1109/JPHOTOV.2022.3162340.

  14. Vivek Verma, Kaushik Pal, “A Finite Element Investigation on the Design of Mechanically Compatible Functionally Graded Orthopaedic Plate for Diaphyseal Tibia Transverse Fracture”, Composites Part C: Open Access, Volume 7, March 2022, DOI: 10.1016/j.jcomc.2022.100228.

  1. Nidhi Pal, Somesh Banerjee, Partha Roy, Kaushik Pal, “Cellulose nanocrystals-silver nanoparticles-reduced graphene oxide based hybrid PVA nanocomposites and its antimicrobial properties”, International Journal of Biological Macromolecules, Volume 191, 30 November 2021, Pages 445-456 – DOI: 10.1016/j.ijbiomac.2021.08.237.

  2. Tushar Roy, Sunil Wanchoo, Kaushik Pal, “Synergetic proton-conducting effect of sulfonated PEEK-MO2-CNT membranes for PEMFC applications”, Ionics, 27, pages4859–4873 (2021) – DOI: 10.1007/s11581-021-04259-8.

  3. Pushpendra Singh, Bilen Akuzum; Christopher E. Shuck, Kaushik Pal, Yury Gogotsi; E. Caglan Kumbur, “MXene-based Suspension Electrode with Improved Energy Density for Electrochemical Flow Capacitors”, Journal of Power Sources, Volume 506, 2021, 230187 – DOI: 10.1016/j.jpowsour.2021.230187.

  4. Atul Kumar, Kaushik Pal, Suhrit Mula, “Effects of cryo-FSP on metallurgical and mechanical properties of stir cast Al7075–SiC nanocomposites”, Journal of Alloys and Compounds, Volume 852, 2021, 156925 – DOI: 10.1016/j.jallcom.2020.156925.

  5. Vinay Panwar, Vijay Pandey, Kaushik Pal, “Dynamic mechanical and EWF study of reactive organo-montmorillonite and carbon black filled polyurethane nanocomposites”, Polymer-Plastics Technology and Materials, 60, 9, Pages 962-973, 2021 – DOI: 10.1080/25740881.2020.1869779.

  6. Manmeet Kaur, Kaushik Pal, “Synthesis, Characterization and Electrochemical Evaluation of Hydrogen Storage Capacity of Graphitic Carbon Nitride and Its Nanocomposites in an Alkaline Environment”, J Mater Sci: Mater Electron, 2021 – DOI: 10.1007/s10854-021-05882-x.

  1. Natarajan, S., Rathanasamy, R., Palaniappan, S. K., Velayudham, S., Subburamamurthy, H. B., & Pal, K. (2020). Comparison of MA-g-PP effectiveness through mechanical performance of functionalised graphene reinforced polypropylene. Polímeros: Ciência e Tecnologia, 30(3), e2020035 – DOI: 10.1590/0104-1428.05620.

  2. Subhash Singh, Kaushik Pal, “Investigation on microstructural, mechanical and damping properties of SiC/TiO2, SiC/Li4Ti5O12 reinforced Al matrix”, Ceramic International, 2020 – DOI: 10.1016/j.ceramint.2020.10.068.

  3. Vinay Panwar, Kaushik Pal, “Influence of addition of selective metallic species on mechanical properties of graphene/acrylonitrile-butadiene-styrene composites”, Polymer Composites, Volume 41, Issue 4, 2020, Pages 1636-1648 – DOI: 10.1002/pc.25485.

  4. Souvik Bag, Kaushik Pal, “Sulfonated poly (ether ether ketone) based carbon dioxide gas sensor: Impact of sulfonation degree on sensing behavior at different humid condition”, Sensors and Actuators: B. Chemical, Volume 303, 2020, 127115 – DOI: 10.1016/j.snb.2019.127115.

  5. Subhash Singh, Kaushik Pal, “Influence of texture evolution on mechanical and damping properties of SiC/Li2ZrO3/Al composite through friction stir processing”, Journal of Engineering Materials and Technology, 2020, 142(2), 021011 (9 pages) – DOI:10.1115/1.4045495.

  6. Tushar Roy, Sunil Wanchoo, Kaushik Pal, “Novel sulfonated poly (ether ether ketone)/ rGONR@TiO2 nanohybrid membrane for proton exchange membrane fuel cells”, Solid State Ionics, Volume 349, 2020, 115296 – DOI: 10.1016/j.ssi.2020.115296.

  7. Keerti Rathi, Kaushik Pal, “Fabrication of MoSe2- Graphene Hybrid Nanoflakes for Toxic Gas Sensor with Tunable Sensitivity”, Advanced Materials Interfaces, Vol. 7, Issue 12, 2000140 2020 – DOI: 10.1002/admi.202000140.

  8. Manmeet Kaur, Kaushik Pal, “Potential Electrochemical Hydrogen Storage in Nickel and Cobalt Nanoparticles induced Zirconia-Graphene Nanocomposite”, J Mater Sci: Mater Electron, 31, 10903–10911 (2020) – DOI: 10.1007/s10854-020-03641-y.

  9. Keerti Rathi, A. Naveen Kumar, Kaushik Pal, “Fabrication of flexible La-MoS2 hybrid-heterostructure based sensor for NO2 gas sensing at room temperature”, Nanotechnology, Volume 31, Number 39, 2020, 395504 – DOI: 10.1088/1361-6528/ab9c55.

  10. Babulal Chaudhary, Vinay Panwar, Tushar Roy, Kaushik Pal, “Effect of addition of Hydroxyapatite as secondary filler in CNT reinforced Polypropylene Hybrid Composites”, Polymers and Polymer Composites, 2020 – DOI: 10.1177/0967391120943430.

  11. Pushpendra Singh, Kaushik Pal, “Activated Carbon-Polyaniline composite active material slurry electrode for high capacitance, improved rheological performance electrochemical flow capacitor”, Electrochimica Acta, – DOI: 10.1016/j.electacta.2020.136719.

  12. Keerti Rathi, Kaushik Pal, “Wireless hand-held device based on polylactic acid protected, highly stable, CTAB functionalized phosphorene for CO2 gas sensing”, ACS Applied Materials & Interfaces, 2020, 12, 34, 38365–38375 – DOI: 10.1021/acsami.0c10285.

  1. Babulal Chaudhary, Vinay Panwar, Tushar Roy, Kaushik Pal, “Thermomechanical Behaviour of Zirconia – Multiwalled Carbon Nanotubes Reinforced Polypropylene Hybrid Composites”, Polymer Bulletin, Volume 76, Issue 1, 2019, pp 511–521 – DOI: 10.1007/s00289-018-2381-3.

  2. Subhash Singh, Kaushik Pal, “Effect of texture evolution on mechanical and damping properties of SiC/ZnAl2O4/Al composite through friction stir processing”, Journal of Materials Research and Technology, Vol. 8, Issue 1, 2019, Pages 222-232 – DOI: 10.1016/j.jmrt.2017.07.006

  3. Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Thad Druffel, Mahendra K Sunkara, Kaushik Pal, “Solution processed Mo doped SnO2 as an effective ETL in the fabrication of low temperature planer perovskite solar cell under ambient conditions”, Organic Electronics, January 2019 – 10.1016/j.orgel.2019.01.027.

  4. Manmeet Kaur, Kaushik Pal, “Review on hydrogen storage materials and methods from an electrochemical viewpoint”, Journal of Energy Storage, Volume 23, 2019, Pages 234-249 – DOI: 10.1016/j.est.2019.03.020.

  5. Nidhi Pal, Somesh Banerjee, Partha Roy, Kaushik Pal, “Reduced graphene oxide and PEG-grafted TEMPO-oxidized cellulose nanocrystal reinforced poly-lactic acid nanocomposite film for biomedical application”, Material Science and Engineering C, Volume 104, 2019, 109956 – DOI: 10.1016/j.msec.2019.109956.

  6. Nidhi Pal, Somesh Banerjee, Partha Roy, Kaushik Pal, “Melt-blending of unmodified and modified cellulose nanocrystals with reduced graphene oxide into PLA matrix for biomedical application”, Polymer for Advanced Technologies, 2019 – DOI: 10.1002/pat.4736.

  7. Pratip Roy, Subhash Singh, Kaushik Pal, “Enhancement of mechanical and tribological properties of SiC and CB reinforced aluminium 7075 hybrid composites through friction stir processing”, Advanced Composite Materials, Volume 28, 2019, Pages 1-18 – DOI: 10.1080/09243046.2017.1405596.

  8. Jitendra Bahadur, Amir H. Ghahremani, Sunil Gupta, Thad Druffel, Mahendra K Sunkara, Kaushik Pal, “Enhanced moisture stability of MAPbI3 perovskite solar cells through Barium doping”, Solar Energy, 2019, Volume 190, 2019, Pages 396-404 – DOI: 10.1016/j.solener.2019.08.033.

  9. Karavalasu Velusamy Mahesh Kumar, Kasilingam Krishnamurthy, Rathanasamy Rajasekar, Palaniappan Sathish Kumar, Kaushik Pal and Ganesh Chandra Nayak, Influence of graphene oxide on the static and dynamic mechanical behavior of compatibilized polypropylene nanocomposites, Materials Testing, 61, 10, 2019, pages 986-990 – DOI: 10.3139/120.111411.

  10. Jitendra Bahadur, Amir H. Ghahremani, Blake Martin, Sahar Pishgar, Thad Druffel, Mahendra K Sunkara, Kaushik Pal, “A study on the material characteristics of low temperature cured SnO2 films for perovskite solar cells under high humidity”, Journal of Materials Science: Materials in Electronics, 2019, Volume 30, Issue 20, pp 18452–18461 – DOI: 10.1007/s10854-019-02199-8.

  11. Narayan Debnath, Vinay Panwar, Tushar Roy, Mitali Saha, Kaushik Pal, “Improved dispersion of carbon black in ABS/PANI blend through its acid-functionalization and addition of nanoclay, thereby enhancing mechanical and thermal properties”, Polymer Bulletin, 2019 – DOI: 10.1007/s00289-019-02979-6.

  12. Souvik Bag, Kaushik Pal, “A PCB Based Chemiresistive Carbon Dioxide Sensor Operating at Room Temperature under Different Relative Humidity”, IEEE Transactions on Nanotechnology, Volume: 18, Issue 1, 2019, Page(s): 1119 – 1128 – DOI: 10.1109/TNANO.2019.2946837.

  13. Keerti Rathi, Kaushik Pal, “Ruthenium decorated tungsten disulfide quantum dots for CO2 gas sensor”, Nanotechnology, Volume 31, Number 13, 135502 (13pp) – DOI: 10.1088/1361-6528/ab5cd3.

  1. Subhash Singh, Keerti Rathi, Kaushik Pal, “Synthesis, characterization of graphene oxide wrapped silicon carbide for excellent mechanical and damping performance for aerospace application”, Journal of Alloys and Compounds, Volume 740, 2018, Pages 436-445 – DOI: 10.1016/j.jallcom.2017.12.069.

  2. Subhash Singh, Vinay Panwar, Kaushik Pal, “Synthesis and characterization of micro-composites: For enhanced electrochemical properties”, Surfaces and Interfaces, Volume 11, 2018, Pages 107-111 – DOI: 10.1016/j.surfin.2018.02.002.

  3. Vinay Panwar, Kaushik Pal, Dynamic performance of an amorphous polymer composite under controlled loading of reduced graphene oxide based on entanglement of filler with polymer chains, Journal Polymer Research, 25, 53, 2018 – DOI: 10.1007/s10965-017-1417-y.

  4. Atul Kumar, Ashwin Kumar Godasu, Kaushik Pal, Suhrit Mula, “Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy”, Materials Characterization, Volume 144, 2018, Pages 440-447 – DOI: 10.1016/j.matchar.2018.08.001.

  5. Navjot Kaur, Kaushik Pal, “A comprehensive review on Triboelectric Nanogenerator as a mechanical energy harvester”, Energy Technology, Volume 6, Issue 6, 2018, Pages 958-9972018 – DOI: 10.1002/ente.201700639.

  6. Pankaj Sharma, Vinay Panwar, A. P. Kharitonov, Kaushik Pal, “Effect of nanoclay on carbon black reinforced blend of amorphous–semicrystalline polymers”, Polymer Bulletin, Volume 74, Issue 8, 2017, pp 3341–3351, DOI: 10.1007/s00289-016-1887-9.

  7. Vinay Panwar, Kaushik Pal, “An optimal reduction technique for rGO/ABS composites having high-end dynamic properties based on Cole-Cole plot, degree of entanglement and C-factor”, Composites Part B: Engineering, Volume 114, 2017, Pages 46-57 – DOI: 10.1016/j.compositesb.2017.01.066.

  8. Keerti, Kaushik Pal, “Impact of doping on GO: Fast response-recovery humidity sensor”, ACS Omega, 2 (3), 2017, pp 842–851 – DOI: 10.1021/acsomega.6b00399.

  9. Atul Kumar, Sandan Kumar Sharma, Kaushik Pal, Suhrit Mula, “Effect of process parameters on microstructural evolution, mechanical properties and corrosion behaviour of friction stir processed Al 7075 alloy”, Journal of Materials Engineering and Performance, Volume 26, Issue 3, pp 1122–1134, 2017 – doi:10.1007/s11665-017-2572-3.

  10. Barkha Singh, Pushpendra Singh, Andrew J. Sutherland, Kaushik Pal, “Control of shape and size of poly (lactic acid) microspheres based on surfactant and polymer concentration”, Materials Letters, Volume 195, 2017, Pages 48–51 – DOI: 10.1016/j.matlet.2017.02.068.

  11. Jitendra Bahadur, Kaushik Pal, “Structural and magnetic properties of reduced graphene oxide-TiO2 Nanoflower composite”, Physica E: Low-dimensional Systems and Nanostructures, Volume 90, 2017, Pages 98–103 – DOI: 10.1016/j.physe.2017.02.022.

  12. Navjot Kaur, Kaushik Pal, “Enhanced magnetic properties of cobalt-doped graphene nanoribbons”, Applied Physics A, Volume 123, No. 4, 2017, pp. 259 (7 pages) – DOI: 10.1007/s00339-017-0893-6.

  13. Souvik Bag, Keerti, Kaushik Pal, “Effect of carbon derivatives in sulfonated poly(etherimide) – liquid crystal polymer composite for methanol vapor sensing”, Nanotechnology, Volume 28, Number 20, 2017, 205501 (13 pp) – DOI: 10.1088/1361-6528/aa66b6.

  14. Pushpendra Singh, Jitendra Bahadur, Kaushik Pal, “A novel one-step synthesis process of graphene from rice husk for energy storage applications”, Graphene, Vol. 6, No. 3, pp. 61-71, 2017 – DOI: 10.4236/graphene.2017.63005.

  15. Pushpendra Singh, Kaushik Pal, “Multiphase nanostructured PANI anchored @ CVD grown MWCNT on rGO coated nickel foam for binder free supercapacitor electrode”, Electrochimica Acta, Volume 242, 2017, Pages 47–55 – DOI: 10.1016/j.electacta.2017.05.012.

  16. Jitendra Bahadur, Kaushik Pal, “Efficient Photodegradation of Organic Dye Using Anatase TiO2 Plants as Catalyst”, Electron. Mater. Lett., Volume 13, Issue 6, 2017, Pages 463-470 – DOI: 10.1007/s13391-017-6284-5.

  17. Vinay Panwar, Ananaya Chattree, Kaushik Pal, “Effect of nanoclay on thermomechanical behaviour of graphene oxide/polymer composites”, Procedia Engineering, Volume 216, PP. 101-110, 2017 – DOI: 10.1016/j.proeng.2017.10.1119.

  18. Atul Kumar, Kaushik Pal, Suhrit Mula, “Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro- and nanocomposites by friction stir processing”, Journal of Manufacturing Processes, Volume 30, Pages 1-13, 2017 – DOI: 10.1016/j.jmapro.2017.09.005.

  19. Kaushik Pal, Vinay Panwar, Sven Friedrich, Michael Gehde, “An investigation on vibration welding of thermoplastic-thermoplastic and thermoplastic-semicrystalline materials”, Materials and Manufacturing Processes, 31(3), 2016, 372-378 – DOI: 10.1080/10426914.2015.1019111.

  20. Vinay Panwar, Jitender Bahadur, Kaushik Pal, “An optimum method for uniform synthesis of zirconia on reduced graphene oxide”, Advanced Powder Technology, Volume 27, Issue 2, Pages 728–733, 2016 – DOI: 10.1016/j.apt.2016.02.035.

  21. Jitendra Bahadur, Shraddha Agrawal, Vinay Panwar, Azra Parveen, and Kaushik Pal, “Antibacterial properties of silver doped TiO2 nanoparticles synthesized via Sol-gel technique”, Macromolecular Research, Volume 24, Issue 6, 2016, pp 488–493, DOI: 10.1007/s13233-016-4066-9.

  22. Gangaram Mandoloi, Subhash Singh, Pradeep Kumar, Kaushik Pal, “Effect on crystalline structure of AISI M2 steel using Tungsten-Thorium electrode through MRR, EWR, and surface finish”, Measurement, Volume 90, 2016, pp. 74–84 – DOI: 10.1016/j.measurement.2016.04.041.

  23. Bahadur, J., Singh, P., Panwar, V. and Pal, K. “Catalytic action of graphene oxide towards the growth of carbon nanotubes”, Materials Letters, Volume 178, 2016, Pages 292-295 – DOI: 10.1016/j.matlet.2016.05.022.

  24. Manmeet Kaur, Kaushik Pal, “An investigation for hydrogen storage capability of zirconia-reduced graphene oxide nanocomposite”, International Journal of Hydrogen Energy, Volume 41, Issue 47, 2016, Pages 21861-21869 – 10.1016/j.ijhydene.2016.09.129.

  25. Nidhi Pal, Poornima Dubey, P. Gopinath, Kaushik Pal, “Combined effect of cellulose nanocrystal and reduced graphene oxide into poly-lactic acid matrix nanocomposite as a scaffold and its anti-bacterial activity”, International Journal of Biological Macromolecules, 95C (2017) pp. 94-105 – DOI: 10.1016/j.ijbiomac.2016.11.041.

  26. Navjot Kaur, Jitendra Bahadur, Vinay Panwar, Pushpendra Singh, Keerti Rathi, Kaushik Pal, “Effective energy harvesting from a single electrode based triboelectric nanogenerator”, Nature Scientific Reports, 6, 2016, 38835, doi:10.1038/srep38835.

  27. Subhash Singh, Kaushik Pal, “Influence of surface morphology and UFG on damping and mechanical properties of composite reinforced with spinel MgAl2O4-SiC core-shell microcomposites”, Materials Characterization, Volume 123, 2017, Pages 244-255– 10.1016/j.matchar.2016.11.042.

  28. Kaushik Pal, Jin Kuk Kim, “Enhanced Percolation Threshold and Dielectric of Multi-Walled Carbon Nanotube Reinforced Ethylene-Vinyl Acetate: The Role of Fillers Based Capacitor Applications”, Advanced Science, Engineering and Medicine, Volume 7, Number 1, 2015, pp. 26-32–http://dx.doi.org/10.1166/asem.2015.1653.

  29. Kaushik Pal, Vinay Panwar, Souvik Bag, James P Manuel, Jou-Hyeon Ahn, Jin Kuk Kim, “Graphene oxide/polyaniline/polypyrrole nanocomposite for a supercapacitor electrode”, RSC Advances, Issue 5, 2015, pp. 3005-3010, DOI: 10.1039/C4RA14614J.

  30. Gangaram Mandoloi, Subhas Singh, Pradeep Kumar, Kaushik Pal, “Effect on crystalline structure of AISI M2 steel using copper electrode through material removal rate, electrode wear rate and surface finish”, Measurement, Volume 61, 2015, pp. 305-319 – DOI: 10.1016/j.measurement.2014.10.057.

  31. Kaushik Pal, Jin Kuk Kim, “Role of Fillers on Dispersion of MWCNT/Fluoroelastomeric Composites for High Performance Dielectric Energy Storage Application”, Journal of Nanoscience and Nanotechnology, Volume 15, Number 5, 2015, pp. 3641-3651– doi:10.1166/jnn.2014.9529.

  32. T. Bhattacharya, A. K. Chakraborty, and K. Pal, “Statistical Analysis of the Performance of Solar Photovoltaic Module with the Influence of Different Meteorological Parameters in Tripura, India”, International Journal of Engineering Research, Volume No. 4, Issue No. 3, 2015, pp: 137 – 140.

  33. T. Bhattacharya, A. K. Chakraborty, and K. Pal, “Influence of Environmental Dust on the Operating Characteristics of the Solar PV Module in Tripura, India”, International Journal of Engineering Research, Volume No. 4, Issue No. 3, 2015, pp: 141 – 144.

  34. Vinay Panwar, Ananya Chetri, Kaushik Pal, “A new facile route for synthesizing of graphene oxide using nitric acid-sulphuric acid as intercalating agent”, Physica E: Low-dimensional Systems and Nanostructures, Volume 73, 2015, Pages 235–241 – 10.1016/j.physe.2015.06.006.

  35. Subhash Singh, Kaushik Pal, “Effect of surface modification on silicon carbide particles with nanocrystalline spinel LZO for enhanced damping and mechanical property”, Materials and Design, Volume 82, 2015, Pages 223–237 – DOI: 10.1016/j.matdes.2015.05.076.

  36. Pankaj Sharma, Vinay Panwar, Kaushik Pal, Clay-Assisted dispersion of carbon black in thermoplastic nanocomposites, Journal of Applied Polymer Science, Volume 132, Issue 7, 2015 – DOI: 10.1002/app.41477.

  37. Narayan Debnath, Vinay Panwar, Souvik Bag, Mitali Saha, Kaushik Pal, “Effect of carbon black and nanoclay on mechanical and thermal properties of ABS-PANI/ABS-Ppy blends”, Journal of Applied Polymer Science, Volume 132, Issue 38, 2015 – DOI: 10.1002/app.42577.

  38. Subhash Singh, Kaushik Pal, “Effect of surface modified silicon carbide particles with Al2O3 and nanocrystalline spinel ZnAl2O4 on mechanical and damping properties of the composite”, Materials Science & Engineering A, Volume 644, 2015, Pages 325–336 – 10.1016/j.msea.2015.07.057.

  39. Tanima Bhattacharya, Ajoy K. Chakraborty, and Kaushik Pal, “Computer Simulation of the Influence of Shading on Solar Photovoltaic Array”, International Journal of Ambient Energy, 2016 –DOI:10.1080/01430750.2016.1155484.

  40. Kaushik Pal, “Effect of different nanofillers on mechanical and dynamic behaviour of PMMA based nanocomposites”, Composites Communications, Volume 1, 2016, Pages 25–28 2016 – 10.1016/j.coco.2016.08.001.

  41. Kaushik Pal, Madhumita Mukherjee, Stanislaw Frackowiak, Marek Kozlowski, Chapal K. Das, “Improvement of Physico-Mechanical Properties and stability of Waste PP in presence of Wood Flour and MAH-g-PP”, Journal of Vinyl and Additive Technology, Volume 20, Issue 1, 2014, Pages: 24–30 – DOI 10.1002/vnl.21325.

  42. Pankaj Sharma, Vinay Panwar, Kaushik Pal, “Clay assisted dispersion of carbon black in thermoplastic nanocomposites”, Journal of Applied Polymer Science, Volume 132, Issue 7, 2015– DOI: 10.1002/APP.41477.

  43. Tanima Bhattacharya, Ajoy Kumar Chakraborty, and Kaushik Pal, “Effects of Ambient Temperature and wind speed on Performance Analysis of Mono-crystalline Solar Photovoltaic Module in a particular area”, Journal of Solar Energy, Volume 2014 (2014), Article ID 817078, 5 pages, DOI: 10.1155/2014/817078.

  44. Kaushik Pal, Jin Kuk Kim, Enhanced Electrical and Mechanical Properties of Nanotube Reinforced Composites, ASME 2013 International Mechanical Engineering Congress and Exposition, ASME Proceedings- Emerging Technologies, Volume 11: Emerging Technologies, Paper No. IMECE2013-64249, San Diego, California, USA, November 15-21, 2013, pp. V011T06A019; 4 pages, doi: 10.1115/IMECE2013-64249.

  45. Kaushik Pal, Samir K. Pal, Chapal K. Das, Jin Kuk Kim, “Effect of fillers on morphological and wear characteristics of NR/HSR blends with E-glass fibre”, Materials and Design, Volume 35, Issue R1-R2, pp. 863-872, 2012 – DOI: 10.1016/j.matdes.2011.07.074.

  46. Kaushik Pal, Dong Jin Kang, Zhen Xiu Zhang, Jin Kuk Kim, Dae Suk Bang, “Influence of Pristine and Metal MWCNT on PLA/ABS Blends: Morphology and Electrical Conductivity”, Advanced Science Letters, Volume 18, pp. 114-120, 2012 – DOI: 10.1166/asl.2012.4874.

  47. Chen Zhang, Kaushik Pal, Jong-Ung Byeon, Sang-Min Han, Jin Kuk Kim, “A Study of Mechanical and Thermal Properties of Silicone Rubber/EPDM Damping Materials”, Journal of Applied Polymer Science, Volume 119, Issue 5, 2011, pp. 2737–2741 –DOI: 10.1002/app.31697.

  48. Chen Zhang, Zhen Xiu Zhang, Kaushik Pal, Oe Gi Shin, Hyeon Choel Jo, Sung Hoon Lee, Jin Kuk Kim, “Effect of Silanes on Mechanical and Thermal Properties of Silicone Rubber/ EPDM Blends”, Journal of Macromolecular Science Part B Physics, Volume 50, Issue 2, 2011, pp. 291 – 299 – DOI: 10.1080/00222341003651494.

  49. Chen Zhang, Lei Liu, Zhen Xiu Zhang, Kaushik Pal, Jin Kuk Kim, “Effect of silica and silicone oil on the mechanical and thermal properties of silicone rubber”, Journal of Macromolecular Science Part B Physics, Volume 50, Issue 6, 2011, pages 1144-1153 – DOI:10.1080/08941920.2010.518533.

  50. Kaushik Pal, Samir K. Pal, Chapal K. Das, Jin Kuk Kim, “Effect of fillers on morphological properties and wear characteristics of XNBR/NR blends”, Journal of Applied Polymer Science, Volume 120, Issue 2, 2011, pp. 710–718 – DOI: 10.1002/app.33234.

  51. Kaushik Pal, Dong Jin Kang, Jin Kuk Kim, “Microstructural investigations of zirconium oxide– on core-shell structure of carbon nanotubes”, Journal of Nanoparticle Research, Volume 13, Number 6, pp. 2597-2607, DOI: 10.1007/s11051-010-0152-7.

  52. Dong Jin Kang, Kaushik Pal, Dae Suk Bang, Jin Kuk Kim, “Synergistic effect on crystalline structure of PVDF nanocomposites with different loading by a Twin Screw Extruder”, Journal of Applied Polymer Science, Volume 121, Issue 1, 2011, Pages: 226–233, DOI: 10.1002/app.33524.

  53. Kaushik Pal, R. Rajasekar, S. K. Pal, Jin Kuk Kim, C. K. Das, “Influence of fillers on NR/SBR blends containing ENR-Organoclay nanocomposites: Morphology and Wear”, Journal of Nanoscience and Nanotechnology, Vol.10, Issue 5, pp. 3022–3033, 2010 – DOI:10.1166/jnn.2010.2170.

  54. Zhen Xiang Xin, Zhen Xiu Zhang, Kaushik Pal, Jong Ung Byeon, Sung Hyo Lee, Jin Kuk Kim, “Study of Microcellular Injection-Molded Polypropylene/Waste Ground Rubber Tire Powder blend”, Materials and Design, Volume 31, Issue 1, pp. 589-593, 2010 – DOI: 10.1016/j.matdes.2009.07.002.

  55. Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, S. K. Pal, Jin Kuk Kim, C. K. Das, “Effect of fillers and nitrile blended PVC on NR/HSR with nano silica blends: Morphology and Wear”, Materials and Design, Volume 31, Issue 1, pp. 25-34, 2010 – DOI: 10.1016/j.matdes.2009.07.023.

  56. Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, S. K. Pal, C. K. Das, Jin Kuk Kim, “Effect of fillers on Natural Rubber/ High Styrene Rubber blends with nano silica: Morphology and Wear”, Materials and Design, Volume 31, Issue 2, pp. 677-686, 2010 – DOI: 10.1016/j.matdes.2009.08.014.

  57. Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Samir K. Pal, Chapal K. Das, Jin Kuk Kim, “Influence of carbon blacks on Butadiene rubber/ High styrene rubber/ Natural rubber with nano silica: Morphology and Wear”, Materials and Design, Volume 31, Issue 3, pp. 1156-1164, 2010 – DOI: 10.1016/j.matdes.2009.09.037.

  58. Dong Jin Kang, Kaushik Pal, Se Jeong Park, Dae Suk Bang, Jin Kuk Kim, Effect of eggshell and silk fibroin on styrene-ethylene/butylene-styrene as bio filler, Materials and Design, Volume 31, Issue 4, pp. 2216-2219, 2010- DOI: 10.1016/j.matdes.2009.10.033.

  59. Kaushik Pal, Dong Jin Kang, Zhen Xiu Zhang, Jin Kuk Kim, “Synergistic Effects of Zirconia-coated Carbon Nanotube on Crystalline Structure of Polyvinylidene fluoride nanocomposites: Electrical Properties and Flame-Retardant Behavior”, Langmuir, Volume 26, Issue 5, pp. 3609-3614, 2010 –DOI: 10.1021/la903022j.

  60. Shu Ling Zhang, Zhen Xiu Zhang, Zhen Xiang Xin, Kaushik Pal, Jin Kuk Kim, “Prediction of mechanical properties of polypropylene/waste ground rubber tire powder treated by bitumen composites via uniform design and artificial neural networks”, Materials and Design, Volume 31, Issue 4, pp. 1900-1905, 2010– DOI: 10.1016/j.matdes.2009.10.057.

  61. S. Bose, M. Mukherjee, Kaushik Pal, G. C. Nayak, C. K. Das, “Development of Core-Shell structure aided by SiC-coated MWNT in ABS/ LCP blend”, Polymer for Advanced Technologies, Volume 21, Issue 4, pp. 272-278, 2010 – DOI: 10.1002/pat.1425.

  62. Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Samir K. Pal, Chapal K. Das, Jin Kuk Kim, “Effect of filler and urethane rubber on NR/BR with nanosilica: Morphology and wear”, Journal of Thermoplastic Composite Materials, Volume 23, Issue 5, pp. 717-739, 2010 – DOI: 10.1177/0892705709355234.

  63. Kaushik Pal, Samir K. Pal, Chapal K. Das, Jin Kuk Kim, “Influence of fillers on NR/SBR/XNBR blends. Morphology and Wear”, Tribology International, Volume 43, Issue 8, pp. 1542-1550, 2010 – doi:10.1016/j.triboint.2010.02.015.

  64. Shu Ling Zhang, Zhen Xiu Zhang, Kaushik Pal, Zhen Xiang Xin, Joshua Suh, Jin Kuk Kim, “Prediction of mechanical properties of waste polypropylene/waste ground rubber tire powder blends using artificial neural networks”, Materials and Design, Volume 31, Issue 8, pp. 3624-3629, 2010– DOI: 10.1016/j.matdes.2010.02.039.

  65. Kaushik Pal, S. K. Pal, C. K. Das, Jin Kuk Kim, “Relationship between normal load and dynamic co-efficient of friction on rock-rubber wear mechanism”, Materials and Design, Volume 31, Issue 10, pp. 4792-4799, 2010 – DOI: 10.1016/j.matdes.2010.05.006.

  66. Zhen Xiang Xin, Zhen Xiu Zhang, Kaushik Pal, Dong Jin Kang, Jin Kuk Kim, “Influence of compatibilizers and processing temperature on microcellular injection-molded polypropylene/(waste tire powder) composites”, Journal of Vinyl and Additive Technology, Volume 17, Issue 4, December 2011, Pages: 254–259, 2010, DOI: 10.1002/vnl.20271.

  67. Kaushik Pal, T. Das, R. Rajasekar, S. K. Pal, C. K. Das, “Wear characteristics of styrene butadiene rubber/natural rubber tyre retreading blends with different types of carbon black by DIN abrader and different mining rock surfaces”, Journal of Applied Polymer Science, Volume 111, Issue 1, pp. 348-357, 2009 – DOI: 10.1002/app.29128.

  68. R. Rajasekar, Kaushik Pal, C. K. Das, “Effect of epoxidized natural rubber in high styrene rubber – nanoclay compounds in presence and absence of carbon black”, International Journal of Polymers and Technologies, 2009 – Volume 1, No. 2-3, pp. 155-164, 2009 – ISSN: 0973-6743.

  69. R. Rajasekar, Kaushik Pal, G. Heinrich, A. Das, C. K. Das, “Development of NBR-Nanoclay Composites with Epoxidized Natural Rubber as Compatibilizer”, Materials & Design, Volume 30, Issue 9, pp. 3839-3845, 2009 – DOI:10.1016/j.matdes.2009.03.014.

  70. Zhen Xiang Xin, Zhen Xiu Zhang, Kaushik Pal, Bing Xue Lu, Xu Deng, Sung Hyo Lee, Jin Kuk Kim, “Effects of formulation and processing parameters on the morphology of extruded polypropylene-(waste ground rubber tire powder) foams”, Journal of Vinyl and Additive Technology, Volume 15, Issue 4, pp. 266-274, 2009 – DOI: 10.1002/vnl.20191.

  71. Dong Jin Kang, Seung Kuk Kwak, Kaushik Pal, Zhen Xiu Zhang, Dae Suk Bang, Jin Kuk Kim, “Preparation and characterization of grafting maleic anhydride onto polypropylene by reactive extruder”, Polymer Journal (Korea), Volume 33, No. 4, pp. 353-363, 2009.

  72. Kaushik Pal, R. Rajasekar, Dong Jin Kang, Zhen Xiu Zhang, Jin Kuk Kim, C. K. Das, “Effect of Epoxidized Natural Rubber-Organoclay nanocomposites on NR/High Styrene Rubber blends with fillers”, Materials and Design, Volume 30, Issue 10, pp. 4035-4042, 2009 – DOI:10.1016/j.matdes.2009.05.021.

  73. Kaushik Pal, R. Rajasekar, T. Das, Dong Jin Kang, Samir K. Pal, Jin Kuk Kim, Chapal K. Das, “Effect of fillers on morphological properties in NR/SBR blends for OTR tyres”, Plastic, Rubber and Composites-Macromolecular Engineering, Volume 38, No. 7, pp. 302-308, 2009 – DOI: 10.1179/174328909X435393.

  74. Zhen Xiang Xin, Zhen Xiu Zhang, Kaushik Pal, Dong Jin Kang, Sung Hyo Lee, Jin Kuk Kim, “Effects of Waste Ground Rubber Tire Powder (WGRT) and Chemical Blowing Agent Content on the Cell Morphology and Physicomechanical Properties of Injection-Molded Polypropylene/WGRT Foams”, Journal of Vinyl and Additive Technology, Volume 15, Issue 4, pp. 275-280, 2009 – DOI: 10.1002/vnl.20198.

  75. Dong Jin Kang, Deng Xu, Zhen Xiu Zhang, Kaushik Pal, Dae Suk Bang, Jin Kuk Kim, “Well-controlled microcellular PLA/Silk biodegradable composite foams with Supercritical CO2”, Macromolecular Materials and Engineering, Volume 294, Issue 9, pp. 620-624, 2009 – DOI: 10.1002/mame.200900103.

  76. Zhen Xiang Xin, Zhen Xiu Zhang, Kaushik Pal, Kwang-Jea Kim, Dong Jin Kang, Dae-Suk Bang, Jin Kuk Kim, “Microcellular Structure of PP/Waste Rubber Powder Blends with Supercritical CO2 by Foam Extrusion Process”, Journal of Cellular Plastics, Volume 45, Issue 6, pp. 499-514, 2009– DOI:10.1177/0021955X09342937.

  77. Zhen Xiang Xin, Zhen Xiu Zhang, Bao Sheng Zhang, Kaushik Pal, Xu Deng, Sung Hyo Lee, Jin Kuk Kim, “Expanded Waste Ground Rubber Tire Powder/Polypropylene Composites: Processing-Structure Relationships”, Journal of Composite Materials, Volume 43, Issue 24, pp. 3003-3015, 2009 – DOI: 10.1177/0021998308345346.

  78. Kaushik Pal, T. Das, S. K. Pal, C. K. Das, “Use of carboxylated nitrile rubber and natural rubber blends as retreading compound for OTR tyres”, Polymer Engineering and Science, Volume 48, No. 12, pp. 2410-2417, 2008 – DOI: 10.1002/pen.21196.

  79. T. Das, Kaushik Pal, B. Adhikari, C. K. Das, “Effect of Compatibilizers on the Morphological Properties of ABS and LCP Blends”, Research Letters in Materials Science, Vol. 2007, 2007, pp. 1-4 – DOI:10.1155/2007/18160.

  80. R. Rajasekar, Tanya Das, Kaushik Pal, S. K. Pal, Zheng Peng, Ying Chen, C. K. Das, “Use of ENR / Nanoclay Composites in NR gum compounds”, Nano Trends, Vol. 3, Issue 1, 2007, pp. 1-15.